Search Resume Examples

Cci - Welder Resume Example

Jacob Jones
XXXXX XXX XXXXX XXXXXX XXXX, OCALA, FL 34473 | (H) XXXXXXXXXXXX | XXXXXXXXXXXXXXXXXXXXX
Skills
  • Blueprint Reading
  • Plasma Cutting
  • Carbon Arc Gouging
  • Oxy Acetylene Cutting
  • OSHA 10 Certified
  • TWIC Card
  • Mig(carbon steel, stainless steel,& aluminum)
  • SMAW & GMAW
Experience
Welder Nov 2014 - Dec 2014
C.C.I. Tacoma, Wa
  • Weld components in flat, vertical, or overhead positions.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
Shipfitter Aug 2014 - Nov 2014
H. & L. Welding SAN DIEGO, CA
  • Locate center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
  • Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
Welder Apr 2014 - Aug 2014
U.L.G. OWENSBORO, KY
  • Weld components in flat, vertical, or overhead positions.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Welder Fitters Nov 2012 - Apr 2014
C.C.I. PORTLAND, OR
  • Locate and mark reference points for columns or plates on boiler foundations, following blueprints and using straightedges, squares, transits, or measuring instruments.
  • Position, align, and secure structural parts or related assemblies to boiler frames, tanks, or vats of pressure vessels, following blueprints.
  • Shape seams, joints, or irregular edges of pressure vessel sections or structural parts to attain specified fit of parts, using cutting torches, hammers, files, or metalworking machines.
  • Weld components in flat, vertical, or overhead positions.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Shipfitter Jun 2012 - Nov 2012
PLATIUM CONTRACTORS MOSS POINT, MS
  • Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
  • Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
  • Mark curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
  • Plan locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
  • All work preformed on aluminum ship.

Welder Fitter Dec 2011 - Jun 2012
C.C.I. PORTLAND, OR
  • Weld components in flat, vertical, or overhead positions.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
  • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
  • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
Structural Fitter Mar 2010 - Dec 2011
T.M.M. MORGAN CITY, LA
  • Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
  • Lift or move materials and finished products, using large cranes.
  • Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
  • Heat-treat parts, using acetylene torches.
  • Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
  • Install boilers, containers, and other structures.
Shipfitter Jan 2010 - Mar 2010
WORLD WIDE LABOR PHILADELPHIA, PA
  • Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
  • Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
  • Brace parts in position within hulls or ships for riveting or welding.
Pipefitter Feb 2009 - Nov 2009
P. 2. S. BATON ROUGE, LA
  • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports.
  • Layout, assembly, and installation of piping for air, ammonia, gas, and oil systems.
  • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts,  or soldering, brazing, or welding equipment.
  • Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines.
Pipefitter May 2008 - Feb 2009
DIRECT WORKFORCE HOUMA, LA
  • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports.
  • Cut or drill holes in walls or floors to accommodate the passage of pipes.
  • Layout, assembly, and installation of piping for air, ammonia, gas, and water systems.
  • Disassemble and remove damaged or worn pipe.
  • Fit  valves, couplings, or assemblies to tanks, pumps, or systems, using hand tools.
  • Perform rough-ins, repair and replace fixtures and locate, repair, or remove leaking or broken pipes.
Welder Nov 2007 - May 2008
C. B. & I. FT. LAUDERDALE, FL
  • Weld components in flat, vertical, or overhead positions.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Welder Jun 2007 - Nov 2007
SPIRIT CONSTRUCTION SUMTERVILLE, FL
  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
  • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
  • Weld components in flat, vertical, or overhead positions.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
Welder Feb 2007 - Jun 2007
WORLD WIDE LABOR MILWAUKEE, WI
  • Weld components in flat, vertical, or overhead positions.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Pipefitter May 2006 - Feb 2007
GREENBERRY IND. PORTLAND, OR
  • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports.
  • Layout, assembly, and installation of piping for air, ammonia, gas, and water systems.
  • Fit valves, couplings, or assemblies to tanks, pumps, or systems, using hand tools.
Shipfitter Sep 2003 - May 2006
ADVANCE TECHNOLOGY INC. TAMPA, FL
  • Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
  • Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
  • Mark curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
  • Compute layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
  • Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
  • Fit and align fabricated parts to be welded or assembled.
  • Brace parts in position within hulls or ships for riveting or welding.
  • Install doors, hatches, brackets, and clips.
Shipfitter Jun 2001 - Sep 2003
TAMPA BAY SHIPBUILDING TAMPA, FL
  • Design and prepare templates of wood, paper, or metal.
  • Add dimensional details to blueprints or drawings made by other workers.
  • Inspect machined parts to verify conformance to specifications.
  • Install doors, hatches, brackets, and clips.
  • Locate center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
  • Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
  • Plan locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
Education
Associate of Science: computer engineering Jun 1991 National Education Center Tampa, Fl
Love this resume?

Resume Details

This is a real resume for a Welder in OCALA, Florida with experience working for such companies as Cci, H & L Welding, Ulg. This is one of the hundreds of Welder resumes available on our site for free. Use these resumes as templates to get help creating the best Welder resume.

Previous Companies:

  • CCI
  • H & L Welding
  • ULG

Previous Job Positions:

  • Welder
  • Shipfitter
  • Welder Fitters
  • Welder Fitter
  • Structural Fitter

Schools:

  • National Education Center

Level of Education:

  • Associate of Science

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

Welders Helper

Sweetwater, Texas

Companies Worked For:

CC Transload, Eagle Rail Car Services Roscoe Inc,...

welder

Lillington, North Carolina

Companies Worked For:

John Deere Turf Care, Bob Barker

Shipfitter

Chula Vista, California

Companies Worked For:

Pendry San Diego, NASSCO, GTM Santee, HireCare Hea...

Shipfitter

Jacksonville, Florida

Companies Worked For:

General Dynamics NASSCOMayport Bldg 2194, Charlest...

Welder Fitter

Hot Springs National Park, Arkansas

Companies Worked For:

Craft Manufacturing and Tooling, Freedom works man...

Welder Fitter

Hot Springs National Park, Arkansas

Companies Worked For:

Craft Manufacturing and Tooling, Freedom works man...

Structural Fitter Le...

Ocean Springs, Mississippi

Companies Worked For:

Bollinger Ship Building, Eagle Industrial Services...

Pipefitter

Citrus Heights, California

Companies Worked For:

Immoos Fire Protection Inc, Reliable Tire Service,...

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!