Search Resume Examples

All Coast Llc - Ordinary Seaman Resume Example

Wyatt Scott
XXXXX XXXXXX XXX XX , Guin , AL 35563 | (H) XXXXXXXXXXXX | XXXXXXXXXXXXXXXXXXXXXXXXXXXX
Professional Summary
Skills
  • Certified Through SMS
  • Certified Through Global Safety
  • Crane Operator Certified
  • Hazwoper Certified
  • Confined Space Entrant Certified
  • Rigger Certified
  • Fall Protection Certified
  • Hazardous Communications Certified
  • Safe Gulf IADC Rigpass land and offshore endorsed
  • Incipient firefighting with hands on training
  • Hydrogen Sulfide awareness training
  • Hot work/welding awareness
  • CPR, AED, First aid certified
  • Certified in Emergency Oxygen
Experience
Ordinary Seaman 05/2013 to Present
All Coast LLC Lafayette, LA
  • Maintain government-issued certifications, as required.
  • Lower and man lifeboats when emergencies occur.
  • Stand by wheels when ships are on automatic pilot and verify accuracy of courses, using magnetic compasses.
  • Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
  • Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
  • Read pressure and temperature gauges or displays and record data in engineering logs.
  • Stand gangway watches to prevent unauthorized persons from boarding ships while in port.
  • Examine machinery to verify specified pressures or lubricant flows.
  • Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
  • Load or unload materials from vessels.
  • Lubricate machinery, equipment, or engine parts such as gears, shafts, or bearings.
  • Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
  • Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
  • Provide engineers with assistance in repairing or adjusting machinery.
  • Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
  • Paint or varnish decks, superstructures, lifeboats, or sides of ships.
  • Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
  • Clean and polish wood trim, brass, or other metal parts.
Appliance Installation 03/2008 to 09/2008
Deer Valley Home Builders Guin, Al
  • Level refrigerators, adjust doors, and connect water lines to water pipes for ice makers and water dispensers, using hand tools.
  • Level washing machines and connect hoses to water pipes, using hand tools.
  • Assemble new or reconditioned appliances.
  • Clean, lubricate, and touch up minor defects on newly installed or repaired appliances.
  • Install appliances such as refrigerators, washing machines, and stoves.
  • Measure, cut, and thread pipe, and connect it to feeder lines and equipment or appliances, using rules and hand tools.
  • Take measurements to determine if appliances will fit in installation locations; perform minor carpentry work when necessary to ensure proper installation.
Insulation Workers, Floor, Ceiling, and Wall 03/2007 to 03/2008
Cooper Insulation Hamilton, Al
  • Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
  • Measure and cut insulation for covering surfaces, using tape measures, handsaws, power saws, knives, or scissors.
  • Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture, using saws, knives, rasps, trowels, blowers, or other tools and implements.
  • Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
  • Fill blower hoppers with insulating materials.
  • Move controls, buttons, or levers to start blowers and regulate flow of materials through nozzles.
  • Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
  • Remove old insulation such as asbestos, following safety procedures.
Shipping, Receiving, and Traffic Clerks 02/2004 to 03/2007
Road Gear Trucking Equipment LLC Russellville, Al
  • Examine shipment contents and compare with records such as manifests, invoices, or orders to verify accuracy.
  • Record shipment data, such as weight, charges, space availability, damages, or discrepancies for reporting, accounting, or recordkeeping purposes.
  • Prepare documents, such as work orders, bills of lading, or shipping orders, to route materials.
  • Confer or correspond with establishment representatives to rectify problems, such as damages, shortages, or nonconformance to specifications.
  • Pack, seal, label, or affix postage to prepare materials for shipping, using hand tools, power tools, or postage meter.
  • Contact carrier representatives to make arrangements or to issue instructions for shipping and delivery of materials.
  • Deliver or route materials to departments using handtruck, conveyor, or sorting bins.
  • Requisition and store shipping materials and supplies to maintain inventory of stock.
  • Determine shipping methods, routes, or rates for materials to be shipped.
Band Saw Operator 09/1999 to 02/2004
G & G Steel Inc. Russellville, Al
  • Notify supervisors of mechanical malfunctions.
  • Repair or replace worn or defective parts or components, using hand tools.
  • Inspect machinery to determine whether repairs are needed.
  • Adjust machine controls, such as heating mechanisms, tensions, and/or speeds to produce specified products.
  • Start machines, monitor operations, and make adjustments as needed.
  • Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
  • Stop machines when specified amounts of product have been produced.
  • Operate machines for test runs to verify adjustments and to obtain product samples.
  • Install, level, and align components, such as gears, chains, guides, dies, cutters, and/or needles to set up machinery for operation.
  • Program electronic equipment.
Metal Shop 06/1998 to 08/1999
Buccaneer Homes Winfield, Al
  • Determine project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings, and written or verbal instructions.
  • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
  • Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
  • Fabricate or alter parts at construction sites, using shears, hammers, punches, or drills.
  • Select gauges or types of sheet metal or nonmetallic material, according to product specifications.
  • Develop and lay out patterns that use materials most efficiently, using computerized metalworking equipment to experiment with different layouts.
  • Inspect individual parts, assemblies, and installations for conformance to specifications and building codes, using measuring instruments such as calipers, scales, and micrometers.
  • Drill and punch holes in metal, for screws, bolts, and rivets.
  • Trim, file, grind, deburr, buff, or smooth surfaces, seams, or joints of assembled parts, using hand tools or portable power tools.
  • Finish parts, using hacksaws or hand, rotary, or squaring shears.
  • Shape metal material over anvils, blocks, or other forms, using hand tools.
  • Fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into place.
Education
Short-Term Certificate: Welding May 2010 Bevill State College - Hamilton, AL
Love this resume?

Resume Details

This is a real resume for a Ordinary Seaman in Guin, Alabama with experience working for such companies as All Coast Llc, Deer Valley Home Builders, Cooper Insulation. This is one of the hundreds of Ordinary Seaman resumes available on our site for free. Use these resumes as templates to get help creating the best Ordinary Seaman resume.

Previous Companies:

  • All Coast LLC
  • Deer Valley Home Builders
  • Cooper Insulation

Previous Job Positions:

  • Ordinary Seaman
  • Appliance Installation
  • Insulation Workers
  • Floor
  • Ceiling

Schools:

  • Bevill State College

Level of Education:

  • Short-Term Certificate

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

Ordinary Seaman

Norfolk, Virginia

Companies Worked For:

Keystone Shipping Co Cape Ray, Seafarers Internati...

Appliance Installati...

Rancho Cordova, California

Companies Worked For:

Alta Construction Inc, Army National Guard, Sunris...

Insulation Workers

West Jordan, Utah

Companies Worked For:

GBI Guthrie Brothers Insulation, CCC Group, CCC Gr...

Sales Floor Associat...

Drexel Hill, Pennsylvania

Companies Worked For:

Goodwill Industries, Advanced Nursing Care, Chartw...

Drywall And Ceiling...

Suisun City, California

Companies Worked For:

United States Air Force

wall deli

Glendale, Arizona

Companies Worked For:

Frys Store, MJs Escorts LLC, ABL Enterprise, Perfr...

Shipping

Owasso, Oklahoma

Companies Worked For:

Muncie Power Products Inc, GRC Sercel, American Ai...

Receiving Supervisor...

Hamilton, New Jersey

Companies Worked For:

Agostino Home Foods Of PA, DHL, Audi, Amazon Fulfi...

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!