North Carolina Department of Transportation Ferry Division - Marine Welder Resume Example

Love this resume? Build your own now

Andrew King
XXX XXXX XXXX XXXX, Powells Point, NC 27966
H: XXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
Professional Summary

Seasoned Welder with more than 8 years of experience in fast-paced Construction Enviroment. Excellent Pipe and Structural welding skills. Track record of achieving exceptional results in Welding and Fabrication.

Skills
  • Arc Welding 1,2,3,4 & 6G positions on Carbon and Stainless Steel from Sch. 40-80.
  • Mig/ Fluxcore Welding 1,2,3,4, & 6G positions on Carbon, Stainless, and Aluminum.
  • Tig Welding 1,2,3,4, & 6G Positions on Carbon and Stainless Steel.
  • Plasma and Oxy Acetylen cutting of metals required in the trade.
  • Fabrication according to the drawings and Blueprints required specifications.
  • Great understanding of PPE and Osha standards for personal safety.
  • Equipment Operation of Fork Lifts, Scissor Lifts, Cherry Pickers, Overhead Cranes, Basket Lifts, and Extended Fork lifts such as Lulls, or JLGs.
  • Sandblasting
  • Reading Comprehension
  • Social Perceptiveness
  • Production and Processing
  • Coordination
  • Judgment and Decision Making
  • Troubleshooting
  • Complex Problem Solving
  • Time Management
  • Instructing
  • Building and Construction
  • Quality Control Analysis
Experience
Marine Welder 07/2014 - Present
North Carolina Department of Transportation Ferry Division - Manns Harbor, NC
  • Weld components in flat, vertical, or overhead positions.
  • Operate safety equipment and use safe work habits.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
  • Gouge metals, using the air-arc gouging process.
  • Set up and use ladders and scaffolding as necessary to complete work.
  • Operate metal shaping, straightening, and bending machines, such as brakes and shears.
  • Estimate materials needed for production and manufacturing and maintain required stocks of materials.
  • Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
  • Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
  • Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
  • Signal crane operators to move large workpieces.
  • Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
  • Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
  • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
  • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
Foreman 01/2013 - 07/2014
Elizabeth City Ironworks, Inc - Elizabeth City, NC
  • Site and Shop Foreman of a 4-6 member Crew.
  • Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
  • Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
  • Tack-weld fitted parts together.
  • Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
  • Lift or move materials and finished products, using large cranes.
  • Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
  • Study engineering drawings and blueprints to determine materials requirements and task sequences.
  • Move parts into position, manually or with hoists or cranes.
  • Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
  • Heat-treat parts, using acetylene torches.
  • Install boilers, containers, and other structures.
  • Erect ladders and scaffolding to fit together large assemblies.
Pipe Welder 12/2010 - 12/2012
Ricky's Welding - Shiloh , nc
  • Fabrication of pump skids, roll cases, and repair work on pressurized cylinders.
  • Build/ Repair farm equipment, dump trucks, combines, fuel tanks, and handrails.
  • Plan pipe system layout, installation, or repair, according to specifications.
  • Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
  • Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
  • Measure and mark pipes for cutting or threading.
  • Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
  • Remove and replace worn components.
  • Install automatic controls used to regulate pipe systems.
  • Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.
  • Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools.
  • Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
  • Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.
Structural Fabricator 03/2009 - 12/2010
Osbourne Welding - Portsmouth, VA
  • Specialized in the fabrication of Structural Steel buildings.
  • Fit and Weld all parts of the assembly.
  • Hand rails, staircases, columns, I-beams, trusses, small parts, base plates, stiffeners, etc.
  • Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
  • Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
  • Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
  • Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
  • Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
  • Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
  • Pull, push, or pry structural steel members into approximate positions for bolting into place.
  • Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
  • Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
  • Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
  • Unload and position prefabricated steel units for hoisting as needed.
  • Dismantle structures or equipment.
Plumber/ Pipe Fitter 03/2006 - 01/2009
Diversified Construction Services Inc. - Rocky Mount, NC
  • Installation of plumbing and mechanical pipe for new hospitals, schools, and miscellaneous buildings.
  • 3, 4, 6G Arc Welding 1, 2G MIG Welding (fluxcore) Structural Fabrication Pipe fitting, Pipe welding Pressure Vessel fabrication and welding (Boilers, Lumber treating etc.) Acetylene torch cutting, bending and washing Grinding, beveling, and prepping steel.
  • Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines.
  • Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.
  • Locate and mark the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels.
  • Direct helpers engaged in pipe cutting, preassembly, or installation of plumbing systems or components.
  • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks or toilets, using hand or power tools.
  • Review blueprints, building codes, or specifications to determine work details or procedures.
  • Install underground storm, sanitary, or water piping systems, extending piping as needed to connect fixtures and plumbing.
  • Maintain or repair plumbing by replacing defective washers, replacing or mending broken pipes, or opening clogged drains.
  • Keep records of assignments and produce detailed work reports.
  • Anchor steel supports from ceiling joists to hold pipes in place.
  • Clear away debris in a renovation.
  • Weld small pipes or special piping, using specialized techniques, equipment, or materials, such as computer-assisted welding or microchip fabrication.
Education
Arc Welding: Arc Welding 6G 2007 Nash Community College - Rocky Mount, NC 1, 2, 3, 4, & 6G Arc Welding Positions
Network Security Administration: Computer Repair & Network Security 2007 ECPI College of Technology - Newport News, Va
High School Diploma: High School Diploma 2003 College of the Albermarle - Elizabeth City, NC

People also search for

Marine Welder

Powells Point ,North Carolina

Andrew King

Companies Worked For:

North Carolina Department of Transportation Ferry Division , Elizabeth City Ironworks

JobTitles Held:

Marine Welder , Foreman

Structural Metal Fabricators and Fitters

Lakeland ,Florida

Ava Rogers

Companies Worked For:

Layne Christensen , SMCI

JobTitles Held:

Structural Metal Fabricators and Fitters , Leadman

Assembler

Tampa ,Florida

Jonathan Evans

Companies Worked For:

Generic Pontential Inc , Pollo Tropical

JobTitles Held:

Assembler , Grill

Welder

Carrollton ,Ohio

Olivia Sanchez

Companies Worked For:

Manufacturing Concepts , N

JobTitles Held:

Welder

resume flower ad

About this resume

Marine Welder FROM Powells Point , North Carolina RESUME

This is a resume for a Marine Welder in Powells Point, North Carolina with experience working for such companies as North Carolina Department of Transportation Ferry Division and Elizabeth City Ironworks. The grade for this resume is 0 and is one of hundreds of Marine Welder resumes available on our site for free. Use these resumes as templates to get help creating the best Marine Welder resume.

Dude
School Attended
Nash Community College