Search Resume Examples

The Ritz Carlton Club At Aspen Highlands - Maintenance and Repair Workers Resume Example

Customize this Resume
Luke Young
XXXX XXXXXXX XXXX XXX, Basalt, CO 81621
XXXXXXXXXXXXXXXXXXXXXX
Ph: XXXXXXXXXXXXX
Professional Summary
My tenure at The Ritz-Carlton as their resident carpenter makes me uniquely qualified for this position. I have been a professional carpenter for the last 20 years. Being from the Aspen Colorado area has afforded me the opportunity to work not only on high end custom homes, but cabins, barns, lodges, and lake houses. As a Ritz-Carlton employee I am trained to provide the highest level of service. Whether it be when engaging with a guest, or working laterally with other departments in a support roll or attending to the properties everyday needs. Such as plumbing, HVAC, pools, electrical, and all carpentry. My attention to detail and commitment to the job would make me an asset to your company.
Skills
  • Building and Construction
  • Public Safety and Security
  • Customer and Personal Service
  • Equipment Selection
  • Repairing
  • Installation
  • Troubleshooting
  • Time Management
  • Design
Experience
Maintenance and Repair Workers, General, Mar 2013Present The Ritz-Carlton Club At Aspen Highlands, Aspen, Co
  • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
  • Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
  • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
  • Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.
  • Clean or lubricate shafts, bearings, gears, or other parts of machinery.
  • Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
  • Test and treat water supply.
  • Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.
  • Maintain and repair specialized equipment and machinery found in cafeterias, laundries, hospitals, stores, offices, or factories.
  • Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
  • Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
  • Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
Maintenance and Repair Workers, General, Oct 2010Mar 2013 Destination Resort Management Inc., Snowmass Village, Co
  • Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
  • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
  • Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
  • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
  • Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
  • Estimate repair costs.
  • Train and manage maintenance personnel and subcontractors.
  • Perform general cleaning of buildings or properties.
  • Provide grounds keeping services, such as landscaping and snow removal.
  • Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
General Contractor, Nov 2007Oct 2010 Mike Bush Construction Inc., Basalt, Co
  • Schedule the project in logical steps and budget time required to meet deadlines.
  • Confer with supervisory personnel, owners, contractors, or design professionals to discuss and resolve matters, such as work procedures, complaints, or construction problems.
  • Prepare contracts and negotiate revisions, changes and additions to contractual agreements with architects, consultants, clients, suppliers and subcontractors.
  • Prepare and submit budget estimates, progress reports, or cost tracking reports.
  • Interpret and explain plans and contract terms to administrative staff, workers, and clients, representing the owner or developer.
  • Plan, organize, or direct activities concerned with the construction or maintenance of structures, facilities, or systems.
  • Take actions to deal with the results of delays, bad weather, or emergencies at construction site.
  • Study job specifications to determine appropriate construction methods.
  • Select, contract, and oversee workers who complete specific pieces of the project, such as painting or plumbing.
  • Obtain all necessary permits and licenses.
  • Direct and supervise workers.
  • Requisition supplies or materials to complete construction projects.
  • Determine labor requirements for dispatching workers to construction sites.
Construction Carpenters, Dec 2000Nov 2007 Rudd Construction , Basalt, Co
  • Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
  • Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  • Follow established safety rules and regulations and maintain a safe and clean environment.
  • Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  • Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
  • Verify trueness of structure, using plumb bob and level.
  • Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.
  • Select and order lumber or other required materials.
  • Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
  • Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
  • Maintain records, document actions, and present written progress reports.
  • Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
  • Erect scaffolding or ladders for assembling structures above ground level.
  • Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
  • Construct forms or chutes for pouring concrete.
  • Arrange for subcontractors to deal with special areas, such as heating or electrical wiring work.
  • Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.
  • Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.
  • Apply shock-absorbing, sound-deadening, or decorative paneling to ceilings or walls.
  • Prepare cost estimates for clients or employers.
  • Work with or remove hazardous material.
  • Perform minor plumbing, welding, or concrete mixing work.
Carpenter, Feb 1995Sep 1999 Structural Associates, Glenwood Springs, Co
  • Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
  • Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  • Follow established safety rules and regulations and maintain a safe and clean environment.
  • Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  • Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
  • Verify trueness of structure, using plumb bob and level.
  • Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.
  • Select and order lumber or other required materials.
  • Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
  • Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
  • Erect scaffolding or ladders for assembling structures above ground level.
  • Construct forms or chutes for pouring concrete.
  • Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
  • Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.
  • Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.
Education
High School Diploma, General, May 1987 Highland Park High, Topeka, Ks
Love this resume? Customize this Resume

Resume Details

This is a real resume for a Maintenance and Repair Workers in Basalt, Colorado with experience working for such companies as The Ritz Carlton Club At Aspen Highlands, Destination Resort Management Inc, Mike Bush Construction Inc. This is one of the hundreds of Maintenance and Repair Workers resumes available on our site for free. Use these resumes as templates to get help creating the best Maintenance and Repair Workers resume.

Previous Companies:

  • The Ritz Carlton Club At Aspen Highlands
  • Destination Resort Management Inc
  • Mike Bush Construction Inc

Previous Job Positions:

  • Maintenance and Repair Workers
  • General
  • General Contractor
  • Construction Carpenters
  • Carpenter

Schools:

  • Highland Park High

Level of Education:

  • High School Diploma

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

CNC Mill Operator

Eastlake, Ohio

Companies Worked For:

PMC Industries, National Polishing Systems

Zoning Administrator...

Huntington, Utah

Companies Worked For:

Huntington City, Goldenstar Auto Services LLC, 1 A...

Carpenter

Townsend, Delaware

Companies Worked For:

BJs Wholesale Club, BJs Wholesale, Creative Proper...

Hi Lo Driver

Detroit, Michigan

Companies Worked For:

WorkBox, Dakkota Intergrated Systems, Cardinal Sta...

Automotive Service W...

Brooklyn, New York

Companies Worked For:

Sanitation, Interceptor Auto, AEA Tuning

Plumber Helper

Orlando, Florida

Companies Worked For:

Atlantic Plumbing Solar Engineering Inc, Ace Staf...

Bartender

Charlotte, North Carolina

Companies Worked For:

Napa on Providence, Sip, Town Tavern currently Sip...

Electrical Apprentic...

Laurel, Delaware

Companies Worked For:

AEDEX Electrical, Oreily Electric, All about homes...

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!