Gulf Ship - Industrial Marine Painter Resume Example

Customize Resume

Ethan Davis

XXXXX XXXX XXXXX XXXX, Gulfport , MS 39503

Ph: XXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXX

Professional Summary

Accomplished and energetic employee with a solid history of achievement in maintenance and mechanics. Passionate and motivated, with a drive for excellence. Over five years of experience in maintenance mechanical and repairing pipe lines.

Skills

Equipment Maintenance
Troubleshooting

Operation Monitoring
Judgment and Decision Making

Complex Problem Solving
Production and Processing

Building and Construction
Time Management

Mechanical
Repairing

Experience

Industrial Marine Painter/Blaster Jan 2014－Present Gulf Ship － Gulfport , MS

Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.
Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting.
Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.

Marine Load Arm Technician Aug 2008－Jan 2014 Northwind Fabrication － Gulfport , MS

Repair and replace damaged or worn parts, including valves, pipe line and hydrolic line issues.
Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
Examine parts for damage or excessive wear, using micrometers and gauges.
Repair, rewire, and troubleshoot electrical systems.
Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
Forklift and manlift training from RSC.
Tractor and overhead crane operator.
Oxy-acetelene cutting and flux cored welding.
Pipe and instrument fitting and calibration.
Possesses a valid TWIC card and current passport.
Fill pipes with water or Nitrogen and observe pressure gauges to detect and locate leaks. (hydro testing)
Understands the working enviroment of refineries as well as their safety courses and guidelines.
Subcontracted to places such as, Shell, NuStar Energies, Valero, IMTT, Chevron, Sunoco and Dupont.

Ship fitter May 2007－Aug 2008 Gulf Ship － Gulfport , MS

Fit and align fabricated parts to be welded or assembled.
Brace parts in position within hulls or ships for welding.
Inspect machined parts to verify conformance to specifications.
Apply industrial coating to ensure proper adhesion and protection from rust and corrosion.
Plan and develop layouts from blueprints and templates, applying knowledge of design, effects of heat, and properties of metals.

Auto Body Technician Sep 2005－May 2007 Precision Paint and Body － Long Beach, MS

Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
Select paint according to company requirements, and match colors of paint following specified color charts.
Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
Sand the final finish, and apply sealer once a vehicle has dried properly.

Maintenance Mechanic/ Waste water treatment plant operator/ Boiler technician May 2001－Sep 2005 ANI Pharmacuticals － Gulfport , MS

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
Test and treat water supply.
Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
Operate cutting torches or welding equipment to cut or join metal parts.
Grind and reseat valves, using valve-grinding machines.
Removal and replacement of gear boxes, centrifugal pumps and electric motors.

Education