Search Resume Examples

Aecom - Heavy Equipment Mechanic Resume Example

Esmual Avmeanr
 Strong Work practices. Skilled leader and quick learner. Over 10 years combined experience of forklift and construction equipment experience. Ability to interpret instructions and follow direction. I have intricate knowledge of depot storage locations, material loading, unloading and holding areas. I am a strong leader and a valuable member of any team. I always insure that needed plans, material, and tools are available and ready for my work day and that needed stock is obtained from supply location. I am able to prepare and process all documentation, special handling labels,shipping codes, and required safety data. I have demonstrated proper work methods and constantly check with others after my work is complete to see if any help is needed from myself. I will consult my supervisors to obtain needed information and help in decisions made concerning any that arise during work. To the best of my ability i answer any questions regarding procedures, policies, written instructions, and other directives. I provide information to supervisor on progress and status of work being done, causes of delays, and overall work operations and problems. I always assure that safety and housekeeping rules are followed. I can operate electric, gasoline or diesel powered forklifts that can lift up to 36,000 pounds and at heights more than 168 inches. I have operated forklifts in open and confined spaces. I can operate forklifts to move, load and unload, transfer and transport, and stack or unstack palletized goods,boxes, crates, merchandize, materials and supplies from one location to another. I always conduct driver maintenance and complete necessary trip tickets and other documents such as PMCS.
  • Equipment Maintenance
  • Quality Control Analysis
  • Time Management
  • Management of Material Resources
  • Production and Processing
  • Systems Evaluation
  • Strong leadership 
  • Quick learner 
  • Clean work practices 
Heavy Equipment Mechanic 02/2017 to Current
Aecom Herlong, CA
  • Hours Per Week 40 .
  • Repair and replace damaged or worn parts.
  • Dismantle and reassemble heavy equipment using hoists and hand tools.
  • Operate and inspect machines or heavy equipment to diagnose defects.
  • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
  • Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
  • Read and understand operating manuals, blueprints, and technical drawings.
  • Overhaul and test machines or equipment to ensure operating efficiency.
  • Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
  • Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
  • Examine parts for damage or excessive wear, using micrometers and gauges.
  • Repair, rewire, and troubleshoot electrical systems.
  • Schedule maintenance for industrial machines and equipment, and keep equipment service records.
  • Research, order, and maintain parts inventory for services and repairs.
  • Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
  • Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
  • Adjust and maintain industrial machinery, using control and regulating devices.
  • Direct workers who are assembling or disassembling equipment or cleaning parts.
  • Assemble gear systems, and align frames and gears.
  • Fabricate needed parts or items from sheet metal.
Forklift operator 08/2016 to 02/2017
Aecom Herlong, CA
  • Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, in order to verify specified tonnages and prevent overloads.
  • Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
  • Load, unload, or adjust materials or products on trucks for shipping. 
  • Inform supervisors of equipment malfunctions that need to be addressed.
  • Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
  • Affix identifying information to materials or products, using hand tools.
  • Operate consoles to control automatic palletizing equipment.
  • Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
  • Repair or replace equipment components or parts such as blades, rolls, and pumps.
  • Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
  • Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
  • Learn and follow safety regulations.
  • Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
  • Monitor operations to ensure that health and safety standards are met.
  • Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
  • Check fuel supplies at sites to ensure adequate availability.
  • Keep records of material or equipment usage or problems encountered.
  • Repair and maintain equipment, making emergency adjustments or assisting with major repairs as necessary.
Material handler 05/2016 to 08/2016
Aecom Herlong, CA
  • I have handled rigging for Crane operations with cranes with 80 foot booms and longer. 
  • Can work on hard surfaces and perform work which requires stand, stoop, bend and climb over items.Can lift or otherwise moves materials weighing up to 45 pounds.
  • Licensed on the Van, Light Truck, Mule, Gator, 6K 15K 36K forklift, farm tractor tug tow.
  • Inform supervisors of equipment malfunctions that need to be addressed.
  • Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
  • Affix identifying information to materials or products, using hand tools.
  • Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
  • Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
  • Repair or replace equipment components or parts such as blades, rolls, and pumps.
  • Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
  • Comply with prescribed safety procedures or federal laws regulating waste disposal methods.
  • Drive trucks or other heavy equipment to convey materials to designated locations.
  • Operate machines or equipment to remove, package, store, or transport loads of materials.
  • Load or unload materials into containers or onto trucks, using hoists or forklifts.
Plumbing Assistant 03/2014 to 02/2015
Bonney Plumbing Rancho Cordova, CA
  • Hours per week 40 Supervisor Brad Greenlee Bonney plumbing,Rancho Cordova, CA Installation and repair of sewer mainline via trench less method and hand dig.
  • Installation and repair of main supplywater lines to homes.
  • Installation of water heaters, sinks, toilets and water purifiers.
  • Shop stock inventory,replacement and load out procedures.
  • Forklift operation.
  • Shipping and receiving.
  • In charge of construction of display and demonstration platforms used in sales training.
  • Shop upkeep and safety.
  • Parts delivery and pickup.
  • Assisted in the plumbing and upkeep of Bonney Field and soccer club.
Maintenance and repair worker 11/2011 to 03/2014
Volunteers of America Mather, CA
  • Hours per week 40 Supervisor: Sean McKenney Repair and maintain the electrical, plumbing, mechanical and other related systems at the Mather Community Campus and outlying partner facility buildings.
  • Assist in the inspection, operate and maintain the heating, cooling and ventilation systems and boiler system.
  • Test circuits and components of malfunctioning equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
  • Repair or replace faulty equipment such as defective and damaged telephones, wires, switching system components, and associated equipment.
  • Assist in the remove and remake connections in order to change circuit layouts, following work orders or diagrams.
  • Propane forklift operator.
  • Assist general repairs such as painting, patching walls, security hardware, hanging shelves and grounds keeping.
  • Daily use of tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
Construction Engineer MOS-21E 05/2007 to 12/2010
US Army Schofield Barracks, HI
  • I have used dozers scrapers loaders and graders to construct road, airport runway, for snow sand dirt and debris removal.
  • I have assisted with clean up and debris removal at times of emergencies as a result of storms and natural disasters.
  • I have operated equipment such as graders, dozers, loaders, backhoes, trench diggers, water distributors, sweepers/magnet, large industrial tractors with pan or scraper attachments, scrapers and rollers on rocky, sand, steep or other similar rough surfaces and close to obstacles such as houses, buildings, trees, rocks, drop-offs and other obstructions to clear land areas of brush, rocks, snow etc.; to move and/or spread earth, sand and gravel.
  • Construction equipment operators use bulldozers, cranes, graders and other heavy equipment to complete these kinds of projects. Construction Equipment Operators are responsible for operating crawler and wheeled tractors with dozer attachments, scoop loader, backhoe loaders, hydraulic excavators, motorized grader and towed or self-propelled scraper. Interprets information on grade stakes. Clears, grubs, strips, excavates, backfills, ditches, stockpiles and pushes scraper with tractor crawler. Cuts and spread fills material with scraper. Excavates, stockpiles, backfills, and loads with loader. Scarifies, spreads, levels and constructs V ditch with grader. Transports heavy construction equipment with tractor-trailer. Assists in performance of combat engineer missions.Constructs berms, excavates side hill and finishes side slopes with crawler tractor. Grades to final grade, finishes slopes and mixes soil stabilization materials with grader. Constructs berm with scraper. Performs surface and drainage maintenance.
  • Army commendation medal/ National Defense service medal/ global war on terrorism service medal/ Iraq campaign medal with campaign star/ overseas Service ribbon/ Marksman qualification badge- Expert with Rifle.
  • Expert marksmen on heavy machine gun, 240B, mark 19 grenade launcher and 249 SAW.
  • Platoon armorer.
  • Team leader in charge of 4 solders in combat.
  • Supply SPC.
  • Heavy equipment operator 
  • scrapers graderloaders dump trucks rollers cranes.
  • Daily facilities maintenance and repair of equipment and provided preventivemaintenance on a military installation.
  • Daily facilities maintenance and repair of equipment and provided preventivemaintenance on a military installation.
  • Daily use of hand and power tools, ladders, maintenance vehicles.
  • Unloaded and loaded construction materials.
  • Clean up spills and remove hazardous materials from work site.
  • Observed all safety rules and regulations.
Pump Truck Operator 11/2005 to 02/2007
Copp's Irrigation Adin, CA
  • Installation and repair of pumps, pivots, wheel lines and hand lines, and pipelines.
  • Monitored gauges and flow meters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
  • Recorded operating data such as products and quantities pumped, stocks used, gauging results, and operating times.
  • Communicated with other workers, using signals, radios, or phones, to start and stop flows of materials or substances.
  • Cleaned, lubricated, and general repair of pumps, using hand tools and equipment.
  • Connected hoses and pipelines to pumps prior to material transfer, using hand tools.
Construction Equipment Operator : Heavy Equipment Construction Dec 2007 US Army Corps of Engineers - Fort Leonard Wood , MO Study of the use of Heavy Construction Equipment including scrapers loaders graders doers rollers excavators and cranes.Graduated top of class.
GED: Apr 2007 Lassen Community College - Susanville , CA
Love this resume?

Resume Details

This is a real resume for a Heavy Equipment Mechanic in Doyle, California with experience working for such companies as Aecom, Bonney Plumbing, Volunteers Of America. This is one of the hundreds of Heavy Equipment Mechanic resumes available on our site for free. Use these resumes as templates to get help creating the best Heavy Equipment Mechanic resume.

Previous Companies:

  • Aecom
  • Bonney Plumbing
  • Volunteers of America

Previous Job Positions:

  • Heavy Equipment Mechanic
  • Forklift Operator
  • Material Handler
  • Plumbing Assistant
  • Pump Truck Operator


  • US Army Corps of Engineers
  • Lassen Community College

Level of Education:

  • Construction Equipment Operator
  • GED

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

Heavy Equipment Mech...

Edgewood, Maryland

Companies Worked For:

Dynamic Science Inc, Metra Industries, Engineering...

Heavy Equipment Mech...

Glennville, Georgia

Companies Worked For:

Viracon Inc, ManTech International, Petes Tire Sho...

Forklift Operator

Huntington, Indiana

Companies Worked For:

Superior Essex, Oleys Pizza, General Motors

Forklift Operator

Goose Creek, South Carolina

Companies Worked For:

CocaCola Bottling Company Consolidated, Lintons Me...

Material Handler

Hampton, Virginia

Companies Worked For:

AAFES Dan Daniel Distribution Center, Maximus, Por...

Material Handler

Alhambra, California

Companies Worked For:

Paper Source Converting Manufacturing, Soto Food...

Plumbing Assistant

Hartford, Connecticut

Companies Worked For:

S&A Plumbing, Specialty Printing, Partsfleet, Medi...

Pump Truck Operator

Tooele, Utah

Companies Worked For:

Becks Sanitation, H20 Environmental, Envirocare

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!