Search Resume Examples

Unit Drilling - Floor Hand Resume Example

James Miller
XXX XXX XXX, Tropic , UT 84776
Ph: XXX XXX XXXX
XXXXXXXXXXXXXXXXXXXXXXX
Professional Summary

Iv done a little bit of everything in my work experience.. I started out working with my dad every chance I could as a child. There is where I learned how to work.. He taught me to give a full days work and never be late for a job iv always been to work early sometimes depending on what was going on a hr early. With him as I was 12 he showed me how to run a torch and started to teach me how to weld. He put me in a loader about that same time, where I showed me the basics and set me loose on some open ground  I started my first job as a freshman in high school for ACE Hardware later on that year I was offered a job at a welding shop, Building Rod iron fences, Building trailers and other welding and Fabing. I stayed there till middle of my Junior Year, where I got a job for Legacy Construction. There I was a labor after school till 4pm then I would go with the service guy to service all Equipment (fuel , Lube and Change Oils) so I could get a full 40 hours a week to pay for my Rodeos. After I graduated I was on the concrete crew doing curbs and gutters, Sidewalks ,Box coverts they would move me from there to underground crew operating a loader back filling trenches..as well as paving roads and parking lots when we had them to do. Since I left there I worked in welding shops building Crushers and structural steel shops did some carpenter work, Built oil Rigs , for other companies that iv worked for.. MY STRENGHTS ARE TAKING ORDERS BEING ON TIME AND BEING TO WORK EVERY DAY..

Skills

IV Been a CERTIFIED WELDER, EQUIPMENT OPERATOR , CARPENTER , ROUGHNECK,CONCRETE FLAT WORK  Been a lead man on several different Crews. Been CPR Certified on many occasions. I take orders well follow instructions and don't need to be baby sat to get the job done..

Experience
Floor Hand Nov 2011Jan 2015 UNIT DRILLING CASPER , Wy I was a Pit HAND on the rig.. my job was to maintain the Drilling Mud for drilling operations..
  • Control the viscosity and weight of the drilling fluid.
  • Repair pumps, mud tanks, and related equipment.
  • Listen to mud pumps and check regularly for vibration and other problems, in order to ensure that rig pumps and drilling mud systems are working properly.
  • Guide lengths of pipe into and out of elevators.
  • Clamp holding fixtures on ends of hoisting cables.
  • Weigh clay, and mix with water and chemicals in order to make drilling mud, using portable mixers.
  • String cables through pulleys and blocks.
Equiptment Operater Sep 2011Nov 2011 Harris Construction kenmerr, Nd

I worked as a Equipment Operator. Operating. Loaders 980H, 972H, SKID STEERS, SCRAPERS 631's,627's DOZERS D11N, D10,D8 D5,BACHOE 420 and a excavator occasionally. 

MY DUTIES WERE::

  • Learn and follow safety regulations.
  • Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
  • Locate underground services, such as pipes or wires, prior to beginning work.
  • Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
  • Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
  • Operate tractors or bulldozers to perform such tasks as clearing land, mixing sludge, trimming backfills, or building roadways or parking lots.
  • Operate loaders to pull out stumps, rip asphalt or concrete, rough-grade properties, bury refuse, or perform general cleanup.
CORE DRILLING Oct 2010Sep 2011 Major DRILLING Elko , Nv

I worked for Major drilling CORE DRILLING as a Driller Helper

My Duties were...

  • Repair and maintain automotive and drilling equipment, using hand tools.
  • Observe and monitor equipment operation during the extraction process in order to detect any problems.
  • Clean up work areas and remove debris after extraction

    activities are complete.

  • Document geological formations encountered during work.
  • Withdraw drill rods from holes, and extract core samples.
  • Perform routine maintenance and upgrade work on machines and equipment, such as replacing parts, building up drill bits, and lubricating machinery.
  • Drive trucks, tractors, or truck-mounted drills to and from work sites.
loading aggergate into trucks Mar 2007Sep 2010 Percision Aggergate Prouducts Mesquite , Nv

I worked for this company on and off since I was in high school.. My Dad was the Super.. I Operated all Equipment on the JOB from Loaders. Dozers, Excavators, Skid Steers, Water Trucks ,Scrapers and Paddle wheels with company.. As well as do most all the welding to repair it and Fab up New chutes and Guards.. My DUTIES also included the following:

  • Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
  • Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
  • Examine materials, ingredients, or products visually or with hands, in order to ensure conformance to established standards.
  • Clean, adjust and maintain equipment, using hand tools.
  • Notify supervisors of needed repairs.
  • Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
  • Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
  • Inspect chains, belts, and scrolls for signs of wear.
  • Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
  • Move materials over short distances, such as around a construction site, factory, or warehouse.
  • Perform manual labor to prepare or finish sites, such as shoveling materials by hand.
Education
High School Diploma May 2001 Virgen Valley High School Mesquite, Nv
Love this resume?

Resume Details

This is a real resume for a Floor Hand in Tropic, Utah with experience working for such companies as Unit Drilling, Harris Construction, Major Drilling. This is one of the hundreds of Floor Hand resumes available on our site for free. Use these resumes as templates to get help creating the best Floor Hand resume.

Previous Companies:

  • UNIT DRILLING
  • Harris Construction
  • Major DRILLING

Previous Job Positions:

  • Floor Hand
  • Equiptment Operater
  • CORE DRILLING
  • loading aggergate into trucks

Schools:

  • Virgen Valley High School

Level of Education:

  • High School Diploma

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

Floor hand

Marshall, Texas

Companies Worked For:

Woodlawn Manufacturing, CR England, Azz galvanizin...

Floor hand

Evans, Colorado

Companies Worked For:

TeleTech, Sterilite Corporation

Equiptment Operator

Cedar Grove, Louisiana

Companies Worked For:

Hall Builders Inc, Diamond Jacks Hotel Casino Bos...

Equiptment Operator

Plymouth, North Carolina

Companies Worked For:

Kelloggs Sales Company, Bojangles, Rose Acre Farms...

Floor hand

Purdon , Texas

Companies Worked For:

Strike Llc, Kilmarnock Oil Co, Latshaw Drilling E...

Floor hand

Jennings, Louisiana

Companies Worked For:

AIP Pipeline Inc, Dynamic Energy Services LLC, Aer...

Floor Hand

Merryville, Louisiana

Companies Worked For:

Nabors Drilling, Precision Drilling, CBI, Georgia...

FLOOR HAND

PHARR, Texas

Companies Worked For:

HELMERICHE & PAYNE, NATIONAL OILWELL VARCO, PETRON...

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!