MOORE SUPPLY COM MesquiteTX - CUSTOMER SERVICE REPRESENTIVE Resume Example

Love this resume? Build your own now

XXXX XXXXXXXX XX, PELHAM, NY 10803
Ph: XXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Layla Ross
Professional Summary
Skills
Experience
Jun 2013Mar 2015 MOORE SUPPLY COM MesquiteTX DRIVER
  • Deliver orders and correct material to the customer home, warehouse or jobsite in a timely matter Pull orders in a timely matter Receive material from vendor and make sure it was in good quality and correct amount Ship orders to customer homes or warehouse via UPS, carriers Stock material in the correct loaction Drive forklift to load trucks Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
  • Load and unload trucks, vans, or automobiles.
  • Verify the contents of inventory loads against shipping papers.
  • Maintain records, such as vehicle logs, records of cargo, or billing statements, in accordance with regulations.
  • Read maps and follow written or verbal geographic directions.
  • Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
  • Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
  • Collect delivery instructions from appropriate sources, verifying instructions and routes.
  • Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
  • Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
  • Obtain receipts or signatures for delivered goods and collect payment for services when required.
  • Inventory and inspect goods to be moved to determine quantities and conditions.
  • Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs.
  • Read and interpret maps to determine vehicle routes.
  • Load and unload trucks, or help others with loading and unloading, operating any special loading-related equipment on vehicles and using other equipment as necessary.
  • Wrap goods using pads, packing paper, and containers, and secure loads to trailer walls, using straps.
  • Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
Oct 2012Jun 2013 EXPRESS TEMP SERVICE
  • Deliver orders and correct material to customer home, warehouse or jobsite in a timely matter Drive forklift to load material Pull orders in a timely matter Stock material in correct location in the warehouse Clean warehouse Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
  • Collect delivery instructions from appropriate sources, verifying instructions and routes.
  • Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
  • Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
  • Obtain receipts or signatures for delivered goods and collect payment for services when required.
  • Inventory and inspect goods to be moved to determine quantities and conditions.
  • 4526 Baystone Dr Dallas, Texas, 75211 (214)763-4566 Carlos.moreno1982@YAHOO.COM Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers.
  • Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs.
  • Check all load-related documentation to ensure that it is complete and accurate.
  • Read and interpret maps to determine vehicle routes.
  • Load and unload trucks, or help others with loading and unloading, operating any special loading-related equipment on vehicles and using other equipment as necessary.
  • Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
  • Wrap goods using pads, packing paper, and containers, and secure loads to trailer walls, using straps.
Sep 2007Jan 2012 LISANTI FOODSERVICE IrvingTX WAREHOUSE PULLER
  • Receive and count stock items, and record data manually or using computer.
  • Pack and unpack items to be stocked on shelves in stockrooms, warehouses, or storage yards.
  • Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas.
  • Obtain customers' names, addresses, and billing information, product numbers, and specifications of items to be purchased, and enter this information on order forms.
  • Prepare invoices, shipping documents, and contracts.
  • Inform customers by mail or telephone of order information, such as unit prices, shipping dates, and any anticipated delays.
  • Verify customer and order information for correctness, checking it against previously obtained information as necessary.
  • Direct specified departments or units to prepare and ship orders to designated locations.
  • Check inventory records to determine availability of requested merchandise.
  • File copies of orders received, or post orders on records.
  • Compute total charges for merchandise or services and shipping charges.
  • Adjust inventory records to reflect product movement.
  • Inspect outgoing work for compliance with customers' specifications.
  • Notify departments when supplies of specific items are low, or when orders would deplete available supplies.
  • Pull orders in timely matter Loading and unloading trailers DALLAS INDEPENDENT SCHOOL DISTRICT DallasTX CRAFTSMAN-CONCRETE Nov 2003 ­ Jul 2006 Set the forms that hold concrete to the desired pitch and depth, and align them.
  • Check the forms that hold the concrete to see that they are properly constructed.
  • Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
  • Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
  • Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
  • Produce rough concrete surface, using broom.
  • Mold expansion joints and edges, using edging tools, jointers, and straightedge.
  • Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
  • Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
  • Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
  • Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
  • Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
  • Waterproof or restore concrete surfaces, using appropriate compounds.
  • Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
  • Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
  • Fabricate concrete beams, columns, and panels.
  • Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
  • Build wooden molds, and clamp molds around area to be repaired, using hand tools.
Baystone Dr YAHOO.COM Dallas, Texas
  • Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
  • Polish surface, using polishing or surfacing machine.
  • Apply muriatic acid to clean surface, and rinse with water.
  • Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
  • Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete- mixing machine.
  • Light burners or start heating units of machines, and regulate screed temperatures and asphalt flow rates.
  • Drive machines onto truck trailers, and drive trucks to transport machines and material to and from job sites.
  • Shovel blacktop.
  • Control paving machines to push dump trucks and to maintain a constant flow of asphalt or other material into hoppers or screeds.
  • Operate oil distributors, loaders, chip spreaders, dump trucks, and snow plows.
  • Set up forms and lay out guidelines for curbs, according to written specifications, using string, spray paint, and concrete/water mixes.
  • Place strips of material such as cork, asphalt, or steel into joints, or place rolls of expansion-joint material on machines that automatically insert material.
  • Operate machines that clean or cut expansion joints in concrete or asphalt and that rout out cracks in pavement.
CUSTOMER SERVICE REPRESENTIVE Feb 2000Aug 2003 CASH AMERICA PAWNSHOP DallasTX
  • Create a very positive sales/buying experience for the customer.
  • Identify customer's needs and provide information about the benefits of our service that can meet those needs.
  • Professionally and clearly explain and demonstrate our products, services, features and benefits relating to the customer's needs, as well as, being able to troubleshoot customer service questions to help resolve all customer problems/concerns.
  • Maintain files of existing and potential customers.
  • Maintain floor stocking levels, displays, etc.
  • Perform sales tracking and related reports.
  • Insure that all company policies are followed.
  • Accepting payments on customer accounts and doing exchanges/upgrades correctly.
  • Balancing/reconciliation of cash drawer to meet company standards.
  • Perform customer services activities, as required.
warehouse May 2015Aug 2015 Lisanti Foodservice Irving, TX  Receive and count stock items, and record data manually or using computer.  Pack and unpack items to be stocked on shelves in stockrooms, warehouses, or storage yards.  Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas. Obtain customers' names, addresses, and billing information, product numbers, and specifications of items to be purchased, and enter this information on order forms.  Prepare invoices, shipping documents, and contracts.  Inform customers by mail or telephone of order information, such as unit prices, shipping dates, and any anticipated delays.  Verify customer and order information for correctness, checking it against previously obtained information as necessary.  Direct specified departments or units to prepare and ship orders to designated locations.  Check inventory records to determine availability of requested merchandise. File copies of orders received, or post orders on records.  Compute total charges for merchandise or services and shipping charges. Adjust inventory records to reflect product movement. Inspect outgoing work for compliance with customers' specifications.  Notify departments when supplies of specific items are low, or when orders would deplete available supplies.  Pull orders in timely matter  Loading and unloading trailers
Language
Bilingual Spanish and English fluent speaker
Education
W. H ADAMSON DALLAS, TX

People also search for

Stylist

Streator ,Illinois

Oliver Martinez

Companies Worked For:

The Mane Event , US Foods Service

JobTitles Held:

Stylist , Customer Service Representive

Daycare Provider

Livermore ,California

Jack Carter

Companies Worked For:

Child Care Links , Valley First Credit Union

JobTitles Held:

Daycare Provider , Teller

Customer Service Representive

Buffalo ,New York

Landon Campbell

Companies Worked For:

NV Energy , AAA Mortgage

JobTitles Held:

Customer Service Representive , Loan Officer

Cashier

Beech Island ,South Carolina

Charlotte Murphy

Companies Worked For:

McDonalds , Amick Farms

JobTitles Held:

Cashier , Tray Pack

resume flower ad

About this resume

CUSTOMER SERVICE REPRESENTIVE FROM PELHAM , New York RESUME

This is a resume for a CUSTOMER SERVICE REPRESENTIVE in PELHAM, New York with experience working for such companies as MOORE SUPPLY COM MesquiteTX and DRIVER. The grade for this resume is 0 and is one of hundreds of CUSTOMER SERVICE REPRESENTIVE resumes available on our site for free. Use these resumes as templates to get help creating the best CUSTOMER SERVICE REPRESENTIVE resume.

Dude
School Attended
W. H ADAMSON