Search Resume Examples

Dai Nippon Printing - Coating Group Leader Resume Example

Jacob Jones
XXX XXXXXXXX XXXXX XXXXX, Kannapolis, NC 28083
XXXXXXXXXXXXXXXXXXXXX
Ph: XXXXXXXXXXXX
Professional Summary

Seeking a position in supervision to effectively manage assigned workforce towards the achievement of organizational goals. A self motivated supervisor who paves the way by setting an example for the team. Eager and able to learn new tasks quickly and proficient to aid in the growth of the establishment. Represent establishment with friendly, professional demeanor at all times. Demonstrates understanding of tasks and effectively cooperates with co-workers and senior level management. Proficient in operating different types of machinery in order to coordinate a smooth flow of production. 

Skills
  • Active Listening and Learning
  • Leadershp
  • Judgment and Decision Making
  • Monitoring and Training
  • Administration and Management
  • Time Management
  • Production and Processing
  • Operation Monitoring
Experience
Dai Nippon Printing Concord, NC Coating Group Leader May 2013Feb 2015
  • Oversee activities directly related to making products or providing services
  • Direct and coordinate activities of the department concerned with the production or distribution of products 
  • Review sales and activity reports and other performance data to measure productivity and goal achievement 
  • Assisted with ideas for areas needing cost reduction, program improvement and recommended ways to renovate facility 
  • Manage staff, assisted with preparing work schedules and trained new employees
  • Assigned duties to inspection, test, and repair personnel, using knowledge of workers experience capabilities 
  • Assisted team when issues arose and developed resolutions 
  • Confer with technical personnel and department supervisors to report unresolved coating problems 
  • Reviewed and ensured product was of quality before distribution to consumers
  • Substitute for absent workers by assisting team to alleviate work overload situation
Dai Nippon Printing Concord, NC Coating Operator Oct 2011May 2013
  • Starts pump to admit coating solution to automatic measuring tank and to transfer solution from measuring tank to coating vessel
  • Starts agitator to mix solution
  • Turns valve to add solutions to coating vessel until required balance is achieved 
  • Stops agitator and pumps mixture to storage tanks after specified mixing time
  • Records processing time and pH reading on operating record 
  • Inspect coated or plated areas for defects such as air bubbles or uneven coverage
  • Adjust controls to set temperatures of coating substances and speeds of machines and equipment
  • Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
  • Ensured that dryers was working properly for production of materials
  • Spray coating in specified patterns according to instructions
  • Set up, operate, or tend plating or coating machines to coat metal products with appropriate chemicals, or other metal to protect or decorate surfaces
  • Test machinery to ensure that it is operating properly.
  • Maintain production records
  • Measure, mark, and mask areas to be excluded from coating.
  • Perform equipment maintenance such as cleaning tanks and lubricating moving parts of conveyors
  • Replace worn parts and adjust equipment components, using hand tools
  • Clean and maintain equipment, using water hoses and scrapers and clean workpieces, using wire brushes
  • Install gears and holding devices on conveyor equipment
  • Operate sandblasting equipment to roughen and clean surfaces of workpieces
Dai Nippon Printing Concord, NC Slitter Apr 2011Oct 2011
  • Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers
  • Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws
  • Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances
  • Set up, operate, or tend machines to slit material and load jumbo rolls of material into machines
  • Start machines, monitor their operations, and record operational data
  • Position, align, and secure workpieces against fixtures or stops on machine
  • Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools
  • Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools
  • Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications
  • Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches
  • Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices
  • Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes
  • Replace defective blades or wheels, using hand tools.
  • Mark identifying data on workpieces
  • Turn controls to set cutting speeds, feed rates, or table angles for specified operations
  • Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils
Cabarrus Plastics Concord, NC Injection Molding Machine Operator Jun 2007Jun 2010
  • Pour, pack, spread, or press plaster, concrete, liquid plastic, or other materials into or around models or molds
  • Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds
  • Read work orders or examine parts to determine parts or sections of products to be produced
  • Remove excess materials and level and smooth wet mold mixtures
  • Select sizes and types of molds according to instructions
  • Align and assemble parts to produce completed products, using gauges and hand tools
  • Trim or remove excess material, using scrapers, knives, or band saws
  • Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage
  • Construct or form molds for use in casting metal, clay, or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks
  • Separate models or patterns from molds and examine products for accuracy
  • Locate and scribe parting lines on patterns, using measuring instruments, such as calipers, squares, or depth gauges
  • Smooth surfaces of molds, using scraping tools or sandpaper
  • Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges
  • Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools
  • Engrave or stamp identifying symbols, letters, or numbers on products
  • Clean, finish, and lubricate molds and mold parts
Omnicount Inventory Philadelphia, PA Inventory Auditor Feb 2006Mar 2007
  • Count stock of medications, chemicals, clothing or supplies and enter inventory data into computer.
  • Examine documents, materials, or products and monitor work processes to assess completeness, accuracy, and conformance to standards and specifications.
  • Review documents, such as production schedules, work orders, or staffing tables, to determine personnel or materials requirements or material priorities.
  • Confer with department supervisors or other personnel to assess progress and discuss needed changes.
  • Record production data, including volume produced, consumption of raw materials, or quality control measures.
  • Requisition and maintain inventories of materials or supplies necessary to meet production demands.
Education
Furness High School Philadelphia, PA High School Diploma Jun 2000
Love this resume?

Resume Details

This is a real resume for a Coating Group Leader in Kannapolis, North Carolina with experience working for such companies as Dai Nippon Printing, Cabarrus Plastics, Omnicount Inventory. This is one of the hundreds of Coating Group Leader resumes available on our site for free. Use these resumes as templates to get help creating the best Coating Group Leader resume.

Previous Companies:

  • Dai Nippon Printing
  • Cabarrus Plastics
  • Omnicount Inventory

Previous Job Positions:

  • Coating Group Leader
  • Coating Operator
  • Slitter
  • Injection Molding Machine Operator
  • Inventory Auditor

Schools:

  • Furness High School

Level of Education:

  • High School Diploma

The Easiest Way to Create a Professional Resume.

Create a job-winning resume in minutes.

create your resume

Similar Resumes

View More

Coating operater

Aurora, Illinois

Companies Worked For:

Sonoco Alloyd, Clydes Body shop

Coating operator

Northfield, Ohio

Companies Worked For:

Ritrama, Donatos Pizzeria

Slitter Operator

Ft Scott , Kansas

Companies Worked For:

WestRock Container Corporation, Manpower, Rumfelt...

Slitter Operator

Linwood, Nebraska

Companies Worked For:

FLEXcon, NorAm Logistics, Q C Supply, Appleton, Mo...

Injection Molding Ma...

Waverly, Tennessee

Companies Worked For:

People Ready, Aldi Inc, Magnum Manufacturing

Inventory Auditor

Jacksonville, Florida

Companies Worked For:

Southern Retail Inventory Inc, Quantum Services, B...

Thermal Barrier Coat...

Houston, Texas

Companies Worked For:

Dresser Rand, Siemens, Sermatech International

Auxiliary Operator

Independence, Iowa

Companies Worked For:

Covanta Energy, Robert Bosch Corporation, Kores No...

Get Started on Your Job-winning Resume Today!

Get all the help you need to create a professional resume in minutes. Includes thousands of pre-written examples for hundreds of jobs.

create your resume
Get Started on Your Job-winning Resume Today!