Iatse 478 - Carpenters Resume Example

Love this resume? Build your own now

Anna Gonzales
XXX XXXXXXXXX XX, Westwego, LA 70094 | (H) XXXXXXXXXX | XXXXXXXXXXXXXXXXXXX
Professional Summary

Goal-oriented employee dedicated to high levels of customer satisfaction and meeting aggressive business goals. Hard working and responsible with specialized knowledge in heavy machinery and construction. 

Skills
  • Building and Construction
  • Installation
  • Equipment Selection
  • Quality Control Analysis
  • Critical Thinking
  • Production and Processing
Experience
Carpenters 01/2013 to 09/2015
Iatse 478 New Orleans , La
  • Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
  • Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  • Follow established safety rules and regulations and maintain a safe and clean environment.
  • Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  • Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
  • Verify trueness of structure, using plumb bob and level.
  • Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.
  • Select and order lumber or other required materials.
  • Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
  • Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
  • Erect scaffolding or ladders for assembling structures above ground level.
  • Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
  • Construct forms or chutes for pouring concrete.
  • Perform minor plumbing, welding, or concrete mixing work.
Welder/fitter 01/2012 to 12/2012
Palmer steel Mission , Tx
  • Weld components in flat, vertical, or overhead positions.
  • Operate safety equipment and use safe work habits.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
  • Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
  • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
  • Mark or tag material with proper job number, piece marks, and other identifying marks as required.
  • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
  • Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
  • Remove rough spots from workpieces, using portable grinders, hand files, or scrapers.
  • Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
  • Preheat workpieces prior to welding or bending, using torches or heating furnaces.
  • Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
  • Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
  • Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
  • Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
Welder/fitter 01/2011 to 01/2012
Strong structure steel Pharr, Tx
  • Weld components in flat, vertical, or overhead positions.
  • Melt lead bars, wire, or scrap to add lead to joints or to extrude melted scrap into reusable form.
  • Gouge metals, using the air-arc gouging process.
  • Set up and use ladders and scaffolding as necessary to complete work.
  • Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting and riveting as necessary.
  • Operate metal shaping, straightening, and bending machines, such as brakes and shears.
  • Fill holes, and increase the size of metal parts.
  • Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
  • Use fire suppression methods in industrial emergencies.
  • Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
  • Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
  • Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
  • Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
  • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
  • Mark or tag material with proper job number, piece marks, and other identifying marks as required.
  • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
  • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
  • Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
  • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Education
Certified welder: Welding Jan 2011 Mic tech - McAllen , Tx
High School Diploma: Recommended May 2005 A c jones high school - Beeville , Tx
Languages

Spanish, level of proficiency: conversational

People also search for

Cabinetmakers and Bench Carpenters

Holton ,Kansas

Noah Smith

Companies Worked For:

Boyer Cabinetry , Trails Cafe

JobTitles Held:

Cabinetmakers and Bench Carpenters , Cook

Carpenter

Carson City ,Nevada

Nora Butler

Companies Worked For:

Gerald Knott Construction , Tahoe Sierra Builders

JobTitles Held:

Carpenter , Foreman

Carpenter

Roscoe ,Illinois

Ava Rogers

Companies Worked For:

Kurcab Brothers Carpentry Inc , Len Kurcab Carpentry

JobTitles Held:

Carpenter , Part Owner

Carpenter

Orange ,California

Logan White

Companies Worked For:

Heritage Homes , Morenos Restaurant

JobTitles Held:

Carpenter , Waiter

resume flower ad

About this resume

Carpenters FROM Westwego , Louisiana RESUME

This is a resume for a Carpenters in Westwego, Louisiana with experience working for such companies as Iatse 478 and Palmer steel. The grade for this resume is 0 and is one of hundreds of Carpenters resumes available on our site for free. Use these resumes as templates to get help creating the best Carpenters resume.

Dude
School Attended
Mic tech